~*~*~*~*~So this month's theme fit perfectly with what I was doing for my technique clubs this month. This first card though, was a sample for my recent new catalog open house - it uses the Toil and Trouble DSP and Spooky Sweets Stamp Set - that little witch is just sooooo cute!
Since that card was such a hit, I decided to use the same DSP, along with our new shimmer paints for my clubs. Here is the card we came up with for that. The sentiment here is from the Cauldron Bubble set. The cauldron and the black cat were cut out with the coordinating dies - Cauldron Framelit Dies. But we fussy cut the cute little witches. There is actually a die that will cut out one of the poses of witches on the DSP, but does not work with all - so we just fussy cut.
The cauldron is glued flat on the card, while the witch and the kitty are popped up on dimensionals. You can see how they layer over the cauldron, side layer and sentiment. Here's the inside of the card, along with the outside of the envelope - so fun for Halloween!
Below you can see the shimmer paint used 3 ways. 1) we used a sponge to sponge it all over the Blueberry Bliss layer. Then 2) we added a bit of the paint to a folded baby wipe, and using it as a pad, stamped the stars around on the same layer. Finally 3) using an aqua painter, we painted the champagne shimmer onto the green potion oozing out of the cauldron. Hope you can see all the shimmer and dimension in this picture.
We also made the cute little treat holder below. The original design came directly from Angie Juda Kennedy - her blog post can be reached by clicking here - https://mychicnscratch.com/2018/08/cauldron-bubble-halloween.html I loved it, but it takes a large piece of DSPso you can only get two out of a sheet. I wanted to be able to get more out of a sheet, so I adapted the pattern down to do a little treat holder that will hold three Hershey's nuggets.
Below is the pattern and measurements of the little box the way I made it. You can now get 6 from each sheet. When you are done cutting as below - you assemble just as shown on the video in Angie's blog post.
Next I cut three strips of coordinating DSP - 1"x3" each -
And using a glue dot on the each end of the wrong side of the DSP - I wrapped them around Hershey Nuggets.
Adhering on the bottom with the glue dots!
So here are two of the little treat holders - each the same design just using different DSP -
And a side view so you can see the three little nuggets tucked in there - you can get all three in perfectly if you stand them on their ends. What an adorable little gift for friends, family, neighbors - or how about a RAK for your hair stylist, your mailman, the guy at the post office - the possibilities are endless. With 6 out of each 12x12" sheet of DSP - one package of this paper goes a long way.
Check out these Awesome Bloggers
|4.||Sue Vine - Australia|
|13.||Sandra Roberts (UK)|
Great projects! Thanks for sharing
It’s little witch and treat pouches
Gotta love this set it’s so fun to use!!! Great minds!!! ;-)
Love the smaller size of the treat boxes! So cute and way more economical. I will be making some for an upcoming craft show for sure!
Love the mini treat boxes, and wrapping the sweets, tfs
All of your projects are so cute, but I really love the treat boxes. Thank you so much for the instructions!
Such fun projects! Thank you for Sharing!
Such cute uses of the shimmer paint and I love that treat holder!!!
These are such fun projects. Thank you for sharing!
thank you for sharing your projects. I love them both very much.
Post a Comment